|
Morse Hole Saws
Available with and without built-in arbors. Also in deep cut, carbide
tipped and carbide grit versions. Step Drills and Spade Bits, too.
Morse
Reciprocating Saw Blades
Wide selection includes blades for cutting metal, wood, demolition,
composites, nail embedded wood, plastic, rubber and more.
Morse
Portable Band Saw Blades
We make high quality band saw blades for machines used by professional
contractors.
Morse
Hack Saw Blades and Frames
Select from bi-metal, high speed steel, carbon steel and carbide grit
blades. Also comfortable hack saw frames.
Morse Industrial Band Saw Blades
High quality blades to fit any industrial band saw. For high production, pallet dismantling, maintenance and more.
|
|
New!
Metal-Cutting Circular Saw Blade Speeds Cutting Of Steel, Thin Steel and
Aluminum
Say hello to the Morse Metal Devil™, a new metal-cutting circular saw
blade that cuts through steel as easily as traditional saw blades cut
through soft pine 2x4's. The Morse Metal Devil™ combines unique
metallurgy and a special tooth configuration to cut metal faster, cleaner
and cooler than was previously possible. In tests it cut through
6"x1/4" steel plate in an average of less than 12 seconds and
2"x2-1/4" angle iron in less than 6 seconds. The Morse Metal
Devil™ is available in a wide range of sizes from 5-3/8" diameter
to 14" diameter to fit both cordless and corded saws. The unique
metallurgy of the tungsten and titanium carbide cutting tips virtually
eliminates sparks during cutting and minimizes the transfer of heat to the
material being cut. As a result cut parts remain cool to the touch
reducing the wait time required to handle parts between cuts.
The Morse Metal Devil™ works well in most professional
quality saws, but reaches its full potential when mounted on special
metal-cutting circular saws now available from a variety of manufacturers
including The M.K. Morse Company. The blade comes in five basic
configurations for cutting steel, aluminum, thin steel, stainless steel
and wood. The basic difference between each blade is the number of teeth
as well as the shape and rake angle of the teeth. Blades used for cutting
steel and thin steel have 0° rake and a robust tooth shape. Blades used
for cutting softer aluminum, stainless steel and wood have a more forward,
positive rake angle and a more aggressive tooth shape.
|
 |
Morse
Master Cobalt® Reciprocating
Saw Blades
In independent tests they made 3-1/2 times as many cuts in SAE 1020 steel
1" tubing with a .065" wall as the average blades from ten
leading competitors.
Jig
Saw Blades
Smoother cutting blades made from bi-metal, high speed steel, carbon steel
and carbide grit for a variety of cutting applications.
Morse
Master Cobalt® Portable Band Saw Blades
Independent tests show they last more than twice as long as blades from
the five largest competitors when cutting 3/8" x 1" 304
stainless steel bar. They last longer cutting wood, pipe, tubing and more,
as well.
|
