|
Band
Saw Blades
We accept :
Trouble-shooting
and Break-in procedure guides for band saw blades
www.destacoclamp.com
www.marvelbandsaw.com
| | Kalamazoo Heavy-Duty Abrasive
Cut-Off Saws & Equipment
|
|
|
|
|
 ·
Angles 0° to 45° either way
· 1" spindle
· Front lever lock
· Heavy duty stand
· 2-1/2" solid - 3" pipe |
· 1-1/2" Solid to 2-1/2" Shapes
· Angles from 0° to 45° - either way
· Positive index holes - up and down stops
· Two cam-lock vises - lever-lock for table |
| KM1O - 10" Mitre Saw
- 1 PH or 3 PH (Specify)... |
220 lbs. |
|
| WS1O - Adjustable Work
Stop... |
6 lbs. |
| 12-M - Heavy Duty
Stand... |
46 lbs. |
| 12-W - Tray Top Stand for
Wet Sawing... |
60 lbs. |
|
MODEL KM14 -
14" miter
saw with 5 HP - 3 PH motor - 220/440V - less
wheel - Weight 450 lbs. |
|
|
|
|
|
 Rugged
Cast Iron
Arm & Trunnion
1" Spindle
Sealed Bearings
|
|
| MODEL KM16-18 - 16"
OR 18" ABRASIVE MITRE SAW with 10 HP, 3 PH motor.
Please specify voltage. Miters
either direction 45° Two cam
vises. Low voltage manual starter. DRY MODEL ONLY. Less abrasive
wheel. Capacity: Straight cuts - 3" solid, 4-1/2" pipe
and shapes; at 45° - 2-1/2" solid, 4" shapes. Wt: 650
lbs. |
|
MODEL KM2O-22 - 20"
ABRASIVE MITRE SAW with 15 HP, 3 PH motor, magnetic
starter (please specify voltage). Air operated chain vise
standard. Less abrasive wheel. Dry model shown. Capacity:
Straight cuts - 4" solid bar, 6" most shapes; at 45° -
3" solid bar, 5" shapes. Wt: 1000 lbs.
MODEL KM 20-22W - 20" WET ABRASIVE MITRE SAW
same as above, with wet system and magnetic starter. Wt: 1295 lbs. |
|
| 20"
- 22" Mitre Saw With Dust Cover Housing |
 |
MODEL KM20-22V-15
|
|
· 20" or 22" wheel.
· Spindle 1", 2500 RPM.
· Double Air Chain Vises
· Capacities: Straight 4" solid, 6" most
shapes; at 45º - 3" solid, 5" most shapes.
· Covered hood with vacuum base.
· Dimensions - L 52" x W 63" x H 68".
· Miters
45º left or right. |
| Model
KM20-22V-15 15 |
| |
| Model
KM20-22V-20 Same as
above, with 20 |
|
|
|
FOR CUTTING ALUMINUM
AND OTHER
NON-FERROUS MATERIAL WITH STEEL BLADE
· Heavy Duty
· Double V-Belt Drive
· 5 HP, 3 PH, 1750 RPM with Magnetic Starter
· SFPM 6250 or 12500 with 3450 Motor
· Power Down Feed
· Double Air Vises
· Mitre both ways
· Vise open 6"
· Spindle 1"
· 14" Blade (not furnished) |
|
| Model HSM14 - 14"
HIGH SPEED MITRE 5 HP, 3 PH motor with magnetic starter,
1725 or 3450 RPM available. Please specify speed and
voltage. For non-ferrous only. Capacities: Pipe 4-1/2",
Square 4-1/2" Dimensions: 30" wide, 48" deep,
60" high Weight: 750 lbs. |
|
Manufactured by: Kalamazoo Industries, Inc.
USA
|
