High Column also available-  (increases Vertical capacity by 6")

 3 degree canted column now available

Horizontal Capacity

Standard Column 18” (457mm)    High Column 18” (457mm)

Vertical Capacity

Standard Column 22”(560mm)   High Column 28”(712mm)

Vertical Capacity @45 Deg.

Standard Column 12 1/2”(324mm) High Column17”(432mm)

Blade Dimensions

Standard Column 14’-6” (4420mm) High Column 15’-6” (4724mm)

Wheel Diameter

18” (457mm)

Max. Vise Opening

21” (533mm)

Coolant Motor

1/8 HP (.09 kw)

Coolant Capacity

20 Gal. (78L)

Blade Drive Motor

2 HP (1.5 kw)

Blade Speed

50-450 FPM (15-137 M/MIN)

Feed Force

0-140 lbs (0-64 kg)

Shipping Weight

2,870 lbs (1300 kg)

AUTOMATIC COLUMN TRAVERSE STOPS Stop dogs on the Mark II can be set to limit the forward and return travel of the saw’s column. This feature considerably speeds cutting cycles when the full 18” travel of the column is not required for the sawing being done.

IMPROVED CHIP CONTROL The Series 8 Mark II has a chip control system that cleans the blade and collects chips for easy removal. A powered wire brush and two coolant jets wash chips off the band blade immediately after it leaves the cut. A deflector mounted on the base of the column minimizes chip accumulation and interference with the saw operation.