Punch End

1. Only Ironworker to offer (See Through) Mechanical, Optional Urethane, and Hydraulic Strippers.
   


2. Quick Change Coupling Nut Standard!
   
3. Spartan Ironworkers Punch Cylinder mounted vertical to eliminate arcing into the work piece causing distortion.
   
4. Standard Punch & Die, Cleveland Steel Tool 228 punch and 419 die! (Also Cleveland Punch & Die)
   
5. 5 Sets Punch and Die Included 9/16”,11/16”,13/16”,15/16”, 1-1/16”
   
6. Triple Die Block Standard 1.) Standard die holder 2.) 80mm die holder, & 3.) Channel cut-out for C-Channel punching
   


7. T-Slotted table allows for mounting of tooling without proprietary hold-downs.

Flat Bar Shear

8.      Flattest Rake Angle in the Industry minimizes distortion on both sides of the cut.

9.     Scribe Marks on support table facilitate 30 and 45 degree   mitering of bottom leg of angle iron!

10.                         Mechanical Hold-Down Standard, Hydraulic Optional!

11.                         Four way bottom knives, Two way top knives

12.                         “Easy-Gap” Blades

13.                          Electric Back Gauge Standard On All Dual Cylinder Machines

Angle Iron Shear

14.                         “Diamond Shaped Reversible Blade” four cutting edges, two separate radii, allow shearing of angle iron without distortion.

15.                         Able to shear unequal leg angle with no adjustment to machine.

16.                         45 Degree Angle Shearing  on Top and Bottom Legs of Angle.                                                                                                    

17.                         “Quick-Change” Knife.

18.                         Electronic Back-Gauge allows production cutting of material.

Round & Square Bar Shear (Channel Shear)

19.                         Five, Six, or Nine Cavity Round and square Bar shear Standard.

20.                        Virtually No Distortion of Material.

21.                         Optional Channel Shear Knives Install In Minutes.

22.                         Minimal Distortion Of Channel

23.                         Dual Size Knives Available: (i.e.; 4” & 5” on same blade)

24.                         Electronic back gauge allows production cutting of material.

Rectangular and “V” Notcher

25.                         Rectangular Notcher Standard.

26.                         3/8”Capacity 66 Ton,  ½”Capacity 80, 110, 130 Ton, 5/8” 180 Ton

27.                        “V” Notcher Available As Option.

28.                        “V” Notcher allows perfect cutting of 90-degree cuts for bending.

29.                         “V” Notcher produces bending line while cutting 90 degree “

Other Standard Features

30.                         Electronics are Allen Bradley, ABB, Fisher, and Telemequanique

31.                        Covered Limit Switches minimize accidental damage.

32.                         Hydraulic Valves are Rexroth, Filters are Zinga (Wisconsin)

33.  12” Throat Standard On Dual Cylinder models. (20” Optional)

34.                         3 Ft. Electronic Back Gauge is Standard (6 foot Optional)

35.                         “D” Series Machines are Dual Tonnage, Two operators can run both ends simultaneously, full tonnage!

36.                         Two Piece Gauge Table Standard On Punch Station.

37.                         Machine Light Standard.

38.                         Spartan Ironworkers Feature Welded Construction Minimizing Twist, and eliminating need for frequent torqueing of bolts.

39.                         Best Warranty In The Business 2-Year Parts, 1-Year Labor.

40.                         Electronic Back Gauge Features Knurled Calibration Collar

Back to Ironworkers page